缓冲托辊重量轻,旋转惯性小。托辊专用高分子材料重量轻,比重是钢材的七分之一,用这种材料制成的托辊,重量是普通托辊的二分之一左右,旋转惯性小,托辊与皮带之间的摩擦小。缓冲托辊安装在输送机受料段的下方,减小落料时物料对
河北立体车库 消防报警器塑料配件 电缆接地箱 电缆保护接地箱 塑料土工格栅 消弧线圈装置 输送带的冲击,以廷长输送带的使用寿命.缓冲托辊的间距一般100-600毫米。
The buffer idler has light weight and small rotation inertia. The
special high polymer material for supporting roller is light in weight,
and its specific gravity is one seventh of that of steel. The supporting
roller made of this material is about one half of that of ordinary
supporting roller, with small rotation inertia and small friction
between supporting roller and belt. The buffer idler is installed under
the receiving section of the conveyor to reduce the impact of materials
on the conveyor belt during blanking, so as to prolong the service life
of the conveyor belt. The spacing of the buffer idler is generally
100-600mm.