皮带上托辊粘料怎么办？
What about the tape roller glue?
拉停皮带，将托辊一侧的料挂去，以及皮带内侧上粘结的料，开启皮带去清理托辊另一侧的料；或者不停机的情况下用铁锹轻轻靠在托辊向下转动的方向，（后者切勿用力避免把铁锹带进去。新手请勿尝试）一点点把粘上面的料刮去直至完全清理完成。并及时调整皮带跑偏，更换挡皮，找出料子跑到托辊上的原因并解决，从根源上解决托辊粘料的问题。
Pull and stop the belt, hang the material on one side of the idler and the bonded material on the inside of the belt, open the belt to clean the material on the other side of the idler, or gently rely on the direction of the idler downward rotation with the spade without stopping the machine (the latter must not force to avoid bringing the spade in). Do not try) Scrape away the sticky material bit by bit until it is completely cleaned up. And timely adjust the belt deviation, change the shield, find out the reason why the material runs to the idler and solve the problem of sticking to the idler from the root.